It's simple to concentrate on cleaning the obvious bathroom fixtures—the sink, toilet, and floor. However, there are a couple of regions that slip by everyone's notice where soil, residue, and soap filth can deposit, leaving your washroom not exactly spotless. Here's a deeper look at two often ignored areas and the most effective approaches to address them:

1. Top of the Bathroom Mirror

Why It's Missed: When cleaning the mirror, most of us do so at eye level without using a 2-step ladder, neglecting to move the dust and spatter to the top edge and beyond.

How to Clean It:

  • Step 1: Clear the space around the mirror to guarantee you have enough space to work.
  • Step 2: Utilize a durable step stool or a 2-step stool or ladder to go to the highest point of the mirror. Utilizing a dry microfiber towel, delicately eliminate any residue or soil from the top of the mirror frame.
  • Step 3: Spray the top of the mirror with a glass cleaner to wipe from left to right, never rubbing the mirror in back and forth motion. If the mirror is out of reach, spray cleaner on a microfiber cloth and wipe the top of the mirror. For higher mirrors, use an extendable duster and sweep horizontally from both sides.
  • Step 4: For difficult stains, a half refined vinegar and half water blend functions admirably. Subsequent to applying with a spray bottle, let it sit briefly prior to cleaning.

Top Tip: To avoid streaks and ensure you get all the dirt on the mirror, always wipe the top with horizontal strokes.

2. Top of the Shower Curtain Rod

Why It's Missed: Surprisingly, it collects a lot of dust and rust while being out of sight and frequently not being thought of as a "wet area."

How to Clean It:

  • Step 1: To provide clear access to the rod, remove the shower curtain and liner.
  • Step 2: Use a 2-step stool or ladder for high rods. Wipe down the full length of the rod with a damp microfiber cloth. Use a mix of baking soda and water if you come across any rust stains. If cleaning requires soaping, apply ample cleaner directly on the rod or a microfiber cloth, and wipe gently to maintain moisture for soaking.
  • Step 3: Use a gentle scrub brush or an old toothbrush to scrape the area once the paste has hardened. However in most cases a good wipe with microfiber will do the job. 
  • Step 4: To stop new rust from forming, dry the rod with a clean towel.

Top Tip: After washing, give the rod a thin coat of auto wax to preserve its appearance. It will aid with water resistance and rust prevention.

Recommended Cleaning Products:

Seventh Generation All Purpose Cleaner: Its strong cleaning properties make it reliable. It leaves mirrors and other glass surfaces shining without streaks while also ensuring your family is not harmed by toxic chemicals. Buy Here. 

Arm & Hammer Baking Soda: Perfect for preparing a cleaning mixture to remove stubborn dirt and corrosion. It may remove stubborn stains without harming surfaces because it is mildly abrasive yet strong enough. Get Arm & Hammer Baking Soda

Wrapping it Up!

By considering this blog as your guide, you can make sure that your bathroom shines in all the right places as well as the usual ones! Maintaining a pristine and sanitary bathroom is as crucial as maintaining the remainder of your residence. Purifying your restroom from the core to the periphery, particularly those areas often overlooked can have a substantial impact. You'll notice a cleaner, cozier bathroom if you routinely clean these often ignored areas. 

Still need help? Contact our maid service in Arlington Heights if you live in Chicago northwest suburbs or our Chicago deep cleaning if you live in Chicago.